OSHA Training Tool

3D Construction Safety Simulation

Explore the 3D concrete pour site below. Inspect structural components and click on the red flashing indicators to identify OSHA compliance hazards.

Active Site Audit
Drag to Rotate | Scroll to Zoom
Compliance Audit0 of 5 Spotted
F

Non-Compliant - Shutdown Hazard

OSHA Subpart Q Inspection Score

Audit Site Hazards

Click on any active red hotspot in the 3D construction field to inspect and correct OSHA compliance failures.

OSHA Concrete Site Safety Protocols (Subpart Q)

Concrete operations carry unique and severe hazards—from structural collapse during formwork loading to chemical skin burns from Portland cement contact. Adhering to OSHA Standard 1926 Subpart Q is essential to protecting personnel and ensuring a safe structural pour.

Concrete Chemical Protective PPE

Portland cement is highly alkaline (pH ~12-13) and hygroscopic (moisture-absorbing). Skin exposure to wet concrete can cause severe chemical burns (aluminate burns) without initial pain warnings. Mandatory PPE includes high-density nitrile/waterproof gloves, tall rubber boots, and eye shield protection. If concrete splashes onto skin, immediately rinse with clean water or neutralize with slightly acidic skin wipes (such as vinegar/citrus mixtures).

Formwork Shoring & Bracing Rules

Formwork must be engineered and braced to support all vertical and horizontal loads exerted by active concrete during pours. Shoring equipment should be inspected before use and checked continuously during concrete placement. Under OSHA regulations, structural drawings and load schedules must be kept on site, and no employee should stand beneath active shoring zones during the pour.

Inspection FAQ & Site Checklists

Safety Culture Advantage

A perfect OSHA audit score isn't just about avoiding fines; it prevents severe structural failures and worker injuries. Providing interactive, visual hazard recognition programs (like this 3D simulation) dramatically boosts safety retention rates among field personnel.